Main Page » POWER SUPPLY / CB RADIO / HF RADIO / CAR AUDIO » Power Supply 13.8V 90/100A LED Voltmeter / HF RADIO / CB RADIO / CAR AUDIO
- POWER-SUPPLY24.COM
NIP: 7182075644 - E-mail:sales@power-supply24.com
- Phone+ 48 503 96 77 96
- Store hours8.00am - 8.00pm
New
Power Supply 13.8V 90/100A LED Voltmeter / HF RADIO / CB RADIO / CAR AUDIO
Availability: Always on stock
Shipping time: 24 hours
Condition:
Condition of the product: New
- Product description
- Product reviews (0)
The power supply is configured for shortwave radio applications. 13.8V maximum current: 90A peak current up to 100A.
High power output, quiet, quiet fans, and only operate when needed.
This power supply is ideal for HF or CB radios. It has been professionally configured to work with radio communication devices and therefore does not cause interference.
The voltage is set to exactly 13.9V, which is the optimal voltage for powering HF or CB radios. For safe operation, we set it to around 13.9V, with a small margin :)
A photo of the multimeter is attached.
The device is brand new. You are guaranteed that the product is original and new!
Our devices are 100% new, not worn-out ones with rattling fans when turned on because they've been in service for over 10 years!
Metal banana sockets that handle up to 100A.
Dimensions are approximately 24cm x 8.5cm x 4cm.
Weight: 1 kg.
I've used it with radios such as the Kenwood TS2000, TS590, Yaesu FT2000, and many other HF radios.
It easily supports CB ribbon radios: Lincoln, Jackson, Alan 87, etc., as well as amplifiers.
The power supply has a fan speed adjustment that adjusts to temperature, making it virtually inaudible during operation.
It has warranty seals, so there's no need to worry about something stopping working, for example, after a month, as is often the case.
It comes with an original Dell power cable - 3x0.75mm² or 3x1mm² (a good quality cable that doesn't cause interference from the mains costs about 15 PLN).
Remember, you're buying from a licensed ham!
Each power supply is tested before shipment on Yaesu FT2000 and FTDX101 radios! As well as on SDRs to ensure it doesn't cause interference in the HF band!
73!
de SQ4PKW
High power output, quiet, quiet fans, and only operate when needed.
This power supply is ideal for HF or CB radios. It has been professionally configured to work with radio communication devices and therefore does not cause interference.
The voltage is set to exactly 13.9V, which is the optimal voltage for powering HF or CB radios. For safe operation, we set it to around 13.9V, with a small margin :)
A photo of the multimeter is attached.
The device is brand new. You are guaranteed that the product is original and new!
Our devices are 100% new, not worn-out ones with rattling fans when turned on because they've been in service for over 10 years!
Metal banana sockets that handle up to 100A.
Dimensions are approximately 24cm x 8.5cm x 4cm.
Weight: 1 kg.
I've used it with radios such as the Kenwood TS2000, TS590, Yaesu FT2000, and many other HF radios.
It easily supports CB ribbon radios: Lincoln, Jackson, Alan 87, etc., as well as amplifiers.
The power supply has a fan speed adjustment that adjusts to temperature, making it virtually inaudible during operation.
It has warranty seals, so there's no need to worry about something stopping working, for example, after a month, as is often the case.
It comes with an original Dell power cable - 3x0.75mm² or 3x1mm² (a good quality cable that doesn't cause interference from the mains costs about 15 PLN).
Remember, you're buying from a licensed ham!
Each power supply is tested before shipment on Yaesu FT2000 and FTDX101 radios! As well as on SDRs to ensure it doesn't cause interference in the HF band!
73!
de SQ4PKW
Lack of reviews for this product. Be the first to write a review.
Only registered customers can write reviews for products. If you have an account with us please log in to it, if you do not create a free account and write a review.
Other products in category
pcs. Add to cart